Non-ionic surfactants as innovative skin penetration enhancers: insight in the mechanism of interaction with simple 2D stratum corneum model system.

Transdermal drug delivery is a passive diffusion process of an active compound through the skin which is affected by drug solubility in the multilamellar lipidic matrix of the stratum corneum (SC). Widely used non-ionic surfactants (NIS) can be added into transdermal formulations to enhance the penetration of drugs by influencing the packing of the stratum corneum lipidic matrix. Objective of our study was to analyse the interaction between selected NIS and a simple SC lipidic matrix model system using a variety of surface-sensitive techniques based on the application of Langmuir monolayers. In this work, the well-known surfactant Polysorbate 80 was compared with a modern surfactant Sucrose monolaurate. Infrared reflection-absorption spectroscopy (IRRAS) and epifluorescence microscopy provide information about the effects of those surfactants on the SC model system. Monolayer isotherms of the SC model mixture indicate a very stiff and well-packed layer, however, packing defects are evidenced in epifluorescence studies. The injection of the two NIS underneath the SC monolayers proved their potential to penetrate into the SC model at the air-water interface having a maximum insertion pressure (MIP) above the assumed lateral pressure of biological membranes. The NIS adsorbed preferentially into packing defects seen in epifluorescence microscopy studies with Sucrose monolaurate being more active than Polysorbate 80 in disordering the SC monolayer.

Albumin displacement at the air-water interface by Tween (Polysorbate) surfactants.

Tween (polysorbate) 20 and 80 are surfactants used for the development of parenteral protein drugs, due to their beneficial safety profile and stabilisation properties. To elucidate the mechanism by which Tween 20 and 80 stabilise proteins in aqueous solutions, either by a "direct" protein to surfactant interaction and/or by an interaction with the protein film at the air-water interface, we used spectroscopic (Infrared Reflection Absorption Spectroscopy, IRRAS) and microscopic techniques (Brewster Angle Microscopy, BAM) in combination with surface pressure measurements. To this end, the impact of both types of Tweens with regard to the displacement of the protein from the air-water interface was studied. As a model protein, human serum albumin (HSA) was used. The results for the displacement of the adsorbed HSA films by Tweens 20 and 80 can partially be understood on the basis of an orogenic displacement mechanism, which depends on the critical surface pressure of the adsorbed protein film. With increasing concentration of Tween in the sub-phase, BAM images showed the formation of different domain morphologies. IRRA-spectra supported the finding that at high protein concentration in the sub-phase, the protein film could not be completely displaced by the surfactants. Comparing the impact of both surfactants, we found that Tween 20 adsorbed faster to the protein film than Tween 80. The adsorption kinetics of both Tweens and the speed of protein displacement increased with rising surfactant concentration. Tween 80 reached significant lower surface pressures than Tween 20, which led to an incomplete displacement of the observed HSA film.

The impact of non-ideality of lipid mixing on peptide induced lipid clustering.

The influence of several antimicrobial trivalent cyclic hexapeptides on the mixing behavior of bilayer lipid membranes containing phosphatidylglycerol (PG) and phosphatidylethanolamine (PE) with varying composition was studied using DSC and ITC. The peptides contained three arginines and three aromatic amino acids and had different sequences. All of them induce clustering of PG-rich clusters with bound peptides after binding. In a previous publication we could show that a correlation between clustering efficacy and the antimicrobial activity of the peptides exists (S. Finger et al., Biochim. Biophys. Acta 1848 (2015) 2998-3006). In the current study we investigated whether the non-ideality of the lipid mixture had any effect on the clustering efficacy and the critical peptide/lipid clustering ratio. We could show that for PG/PE membranes containing 1:1 M ratios and lipids with equal or unequal chain lengths, the amount of clustered PG depended only slightly on the absolute chain length and on the chain length difference between PG and PE. Much larger differences were observed when the PG/ PE mixing ratio was changed. In mixtures of DPPG/DPPE with high PG content, the amount of clustered PG per added peptide was much higher than in PE-rich mixtures. The ITC experiments showed that the critical peptide/lipid ratio for cluster formation is also strongly dependent on the PG/PE ratio in the mixture. In the PG/PE 3:1 mixture, the formation of clusters with bound peptide is much more likely than for mixtures with less PG. For 1:1 and 1:3 lipid mixtures, the critical peptide/lipid ratio for demixing is between 0.002 and 0.004. Therefore, even in these mixtures clustering occurs way below charge saturation of the PG in the mixture and the PG-rich clusters are not charge compensated either. The peptide concentration necessary for inducing clustering amounts to ~8 µM, a value well within the range of minimal inhibitory concentration values observed for the cyclic peptides studied here. Our results show that not only the structure of the cyclic peptide influences the clustering efficacy but also the mixing behavior of the lipids in the bilayers has an influence on the amount of clustering induced by binding of cyclic peptides.

Effect of Cholesterol and Myelin Basic Protein (MBP) Content on Lipid Monolayers Mimicking the Cytoplasmic Membrane of Myelin.

Myelin basic protein (MBP) is located in the insulating covers of nerve cells in the brain and spinal cord. By interacting with lipid membranes, it is responsible for compaction of the myelin sheath in the central nervous system, which is weakened in demyelinating diseases. The lipid composition of the myelin leaflet has a high impact on the interaction between the membrane and MBP. Cholesterol is present in the cytoplasmic leaflet with a rather high amount of 44% (mol%). In this study, the focus is on the effect of cholesterol, mainly by varying its content, on the interaction of MBP with a lipid monolayer. Therefore, Langmuir lipid monolayers mimicking the cytoplasmic membrane of myelin and monolayers with variations of cholesterol content between 0% and 100% were measured at the air/water interface with additional imaging by fluorescence microscopy. All experiments were performed with and without bovine MBP to study the dependence of the interaction of the protein with the monolayers on the cholesterol content. The native amount of 44% cholesterol in the monolayer combines optima in the order of the monolayer (presumably correlating to compaction and thermodynamic stability) and protein interaction and shows unique features in comparison to lower or higher cholesterol contents.

Dynamic self-assembly of ions with variable size and charge in solution.

Recently it was found that at ambient temperatures and in specific ternary solvents a cationic macrocyclic tetraimidazolium molecular box and small dianionic salts can self-assemble into highly defined, colloid-like ionic clusters, called ionoids. Here, we present evidence that the solution-based ionic self-assembly process leading to ionoids is a general phenomenon by characterizing new ionic building blocks which are capable of generating loosely bound globular and anisotropic structures similar to those in the established system. Using new cationic and anionic molecules, we show that variations in the size ratio between cationic and anionic component mainly affect size, shape and durability of the ionic clusters. Utilizing dynamic light scattering (DLS), continuously monitored phase-analysis light scattering (cmPALS) and continuous wave electron paramagnetic resonance (CW EPR) spectroscopy, we can thus define generalized ionic ratios, in which specific combinations of ionic compounds with certain size and charge densities are able to form these soft yet durable and long-lived ionic clusters. Furthermore, we characterize the temporal development of our dynamically self-assembled structures in solution from the level of the individual ionic building blocks to stable clusters with minimum lifetimes of months through previously established ionoid evolution diagrams (IEDs). The direct comparison of various cluster systems with respect to their shape, size and charges allows correlations of structural changes of the individual building blocks with the fate of self-assembled entities inside the crafted IEDs. This work generalizes the concept of ionoid formation to ions of specific sizes and charge densities, which may broaden the scope of this new type of highly dynamic and soft yet remarkably durable structures in the field of supramolecular chemistry.

Structure Formation in Class†I and Class†II Hydrophobins at the Air-Water Interface under Multiple Compression/Expansion Cycles.

Hydrophobins are small amphiphilic fungal proteins empirically divided into two classes. We investigated the self-assembled structures of class I SC3 from S. commune and class II HFBII from T. reesei transferred to mica from the air-water interface by using the Langmuir-Schaefer (LS) technique and atomic force microscopy (AFM). The main focus is the influence of areal constraint and multiple compressions and expansions on the morphology of the protein films. SC3 shows a rather homogenous coverage of the mica surface, with fibrillary structures. Multiple compressions to a surface pressure of 13 mn m-1 led to a shortening of the fibrils. HFBII exhibits multilayered structures of varying thickness at higher surface pressures. Multiple compressions led to a variety of large, multilayer aggregates. Several compressions and expansions homogenized the films of both types. Both proteins showed similar dendritic structures with relevant length scales of at least several hundred nanometers at pressures of 13 mn m-1 and above, although the primary structures they assemble into are usually different in size and type, and range from fibrils to hexagonally ordered films. These dendritic structures may stem from a combination of mechanical influences, such as compressions, expansions, and the drying effect during LS transfer, which may simulate processes during physiological applications of hydrophobins, such as encapsulation or release of spores.

Interaction of Myelin Basic Protein with Myelin-like Lipid Monolayers at Air-Water Interface.

Interaction of myelin basic protein (MBP) and the cytoplasmic leaflets of the oligodendrocyte membrane is essential for the formation and compaction of the myelin sheath of the central nervous system and is altered aberrantly and implicated in the pathogenesis of neurodegenerative diseases like multiple sclerosis. To gain more detailed insights into this interaction, the adsorption of MBP to model lipid monolayers of similar composition to the myelin of the central nervous system was studied at the air-water interface with monolayer adsorption experiments. Measuring the surface pressure and the related maximum insertion pressure of MBP for different myelin-like lipid monolayers provided information about the specific role of each of the single lipids in the myelin. Depending on the ratio of negatively charged lipids to uncharged lipids and the distance between charges, the adsorption process was found to be determined by two counteracting effects: (i) protein incorporation, resulting in an increasing surface pressure and (ii) lipid condensation due to electrostatic interaction between the positively charged protein and negatively charged lipids, resulting in a decreasing surface pressure. Although electrostatic interactions led to high insertion pressures, the associated lipid condensation lowered the fluidity of the myelin-like monolayer.

Serum albumin hydrogels in broad pH and temperature ranges: characterization of their self-assembled structures and nanoscopic and macroscopic properties.

We report extended pH- and temperature-induced preparation procedures and explore the materials and molecular properties of different types of hydrogels made from human and bovine serum albumin, the major transport protein in the blood of mammals. We describe the diverse range of properties of these hydrogels at three levels: (1) their viscoelastic (macroscopic) behavior, (2) protein secondary structure changes during the gelation process (via ATR-FTIR spectroscopy), and (3) the hydrogel fatty acid (FA) binding capacity and derive from this the generalized tertiary structure through CW EPR spectroscopy. We describe the possibility of preparing hydrogels from serum albumin under mild conditions such as low temperatures (notably below albumin's denaturation temperature) and neutral pH value. As such, the proteins retain most of their native secondary structure. We find that all the combined data indicate a two-stage gelation process that is studied in detail. We summarize these findings and the explored dependences of the gels on pH, temperature, concentration, and incubation time by proposing phase diagrams for both HSA and BSA gel-states. As such, it has become possible to prepare gels that have the desired nanoscopic and macroscopic properties, which can, in future, be tested for, e.g., drug delivery applications.

The cmc-value of a bolalipid with two phosphocholine headgroups and a C24 alkyl chain: Unusual binding properties of fluorescence probes to bolalipid aggregates.

Bolalipids with a long alkyl chain and two phosphocholine polar groups self-assemble in water into two different types of aggregate structures, namely helical nanofibers at low temperature and two types of micellar aggregates at higher temperature. We tried to determine the critical aggregation concentration (cac) or critical micellar concentration (cmc) of the bolalipid tetracosane-1,24-bis(phosphocholine) (PC-C24-PC) by using different fluorescent probes. The use of pyrene or pyrene derivatives as fluorophores failed, whereas the probes 1,8-ANS and particularly bis-ANS gave consistent results. The structure of the bolalipid aggregates obviously hinders partitioning or binding of pyrene derivatives into the micellar interior, whereas 1,8-ANS and bis-ANS can bind to the surface of the aggregate structures. The observed large increase in fluorescence intensity of bis-ANS indicates that binding to the hydrophobic surface of the aggregates leads to a reduction of the dye mobility. However, binding of bis-ANS is relatively weak, so that the determination of a cac/cmc-value is difficult. Simulations of the intensity curves for PC-C24-PC lead to estimates of the cac/cmc-value of 0.3-1.0×10-6M, depending on the structure of the aggregates. Single molecule fluorescence correlation spectroscopy was used to determine the mobility of bis-ANS as a function of concentration of PC-C24-PC. The dye diffusion time and the molecular brightness are lower at low bolalipid concentration, when only free dye is present, and increase at higher concentration when bis-ANS is bound to the aggregates. The experimental cac/cmc-values are higher than those estimated, using an incremental method for the change in Gibbs free energy for micellization with n-alkyl-phosphocholines with only one polar group as a comparison. Apparently, for PC-C24-PC in micellar or fibrous aggregates, more CH2 groups are exposed to water than in a conventional micelle of an n-alkyl-phosphocholine.

The efficacy of trivalent cyclic hexapeptides to induce lipid clustering in PG/PE membranes correlates with their antimicrobial activity.

Various models have been proposed for the sequence of events occurring after binding of specific antimicrobial peptides to lipid membranes. The lipid clustering model arose by the finding that antimicrobial peptides can induce a segregation of certain negatively charged lipids in lipid model membranes. Anionic lipid segregation by cationic peptides is initially an effect of charge interaction where the ratio of peptide and lipid charges is thought to be the decisive parameter in the peptide induced lipid demixing. However, the sequence of events following this initial lipid clustering is more complex and can lead to deactivation of membrane proteins involved in cell division or perturbation of lipid reorganization essential for cell division. In this study we used DSC and ITC techniques to investigate the effect of binding different cyclic hexapeptides with varying antimicrobial efficacy, to phosphatidylglycerol (PG)/phosphatidylethanolamine (PE) lipid membranes and their ability to induce lipid segregation in these mixtures. We found that these cyclic hexapeptides consisting of three charged and three aromatic amino acids showed indeed different abilities to induce lipid demixing depending on their amino acid composition and their sequence. The results clearly showed that the cationic amino acids are essential for electrostatic binding but that the three hydrophobic amino acids in the peptides and their position in the sequence also contribute to binding affinity and to the extent of induction of lipid clustering. The efficacy of these different hexapeptides to induce PG clusters in PG/PE membranes was found to be correlated with their antimicrobial activity.

Interaction of linear polyamines with negatively charged phospholipids: the effect of polyamine charge distance.

The binding of cationic polyamines to negatively charged lipid membranes is driven by electrostatic interactions and additional hydrophobic contributions. We investigated the effect of polyamines with different number of charges and charge separation on the phase transition behavior of vesicles of phosphatidylglycerols (dipalmitoylphosphatidylglycerol and dimyristoylphosphatidylglycerol) to differentiate between effects caused by the number of charges, the charge distance, and the hydrophobicity of the methylene spacer. Using differential scanning calorimetry and Fourier transform infrared spectroscopy complemented with monolayer experiments, we found that the binding constant of polyamines to negatively charged lipid vesicles depends as expected on the number of charges. However, for diamines, the effect of binding on the main phase transition of phosphatidylglycerols (PGs) is also strongly influenced by the charge distance between the ammonium groups in the backbone. Oligoamines with charges separated by two or three methylene groups bind more strongly and have larger stabilizing effects on the lipid gel phase of PGs. With multivalent polyamines, the appearance of several transition peaks points to effects of molecular crowding on the surface, i.e., binding of only two or three charges to the surface in the case of spermine, and possible concomitant domain formation.

Peptide and protein binding to lipid monolayers studied by FT-IRRA spectroscopy.

Lipid monolayers at the air-water interface represent half of a lipid bilayer and are therefore suitable model systems for studying the binding of peripheral proteins and polypeptides as well as proteins containing hydrophobic membrane anchors to membrane interfaces. Infrared reflection-absorption spectroscopy (IRRAS) of these monolayer films at the air-water interface provides information on the state of the lipid monolayers as well as on the conformational and orientational order of the film constituents. We will review shortly the experimental set-up and the possibilities for obtaining structural information before several applications of the method to lipid-protein monolayers will be described. We will focus on examples where the analysis of the protein and peptide bands for pure monolayers of these compounds are combined with experiments where the same compounds are bound to lipid monolayers. Combination of these experiments leads to detailed information about the conformational properties and the orientation of the molecules at the air-water interface in contrast to being bound to the lipid-water interface. This article is part of a Special Issue entitled: FTIR in membrane proteins and peptide studies.

Binding of cationic pentapeptides with modified side chain lengths to negatively charged lipid membranes: Complex interplay of electrostatic and hydrophobic interactions.

Basic amino acids play a key role in the binding of membrane associated proteins to negatively charged membranes. However, side chains of basic amino acids like lysine do not only provide a positive charge, but also a flexible hydrocarbon spacer that enables hydrophobic interactions. We studied the influence of hydrophobic contributions to the binding by varying the side chain length of pentapeptides with ammonium groups starting with lysine to lysine analogs with shorter side chains, namely omithine (Orn), alpha, gamma-diaminobutyric acid (Dab) and alpha, beta-diaminopropionic acid (Dap). The binding to negatively charged phosphatidylglycerol (PG) membranes was investigated by calorimetry, FT-infrared spectroscopy (FT-IR) and monolayer techniques. The binding was influenced by counteracting and sometimes compensating contributions. The influence of the bound peptides on the lipid phase behavior depends on the length of the peptide side chains. Isothermal titration calorimetry (ITC) experiments showed exothermic and endothermic effects compensating to a different extent as a function of side chain length. The increase in lipid phase transition temperature was more significant for peptides with shorter side chains. FTIR-spectroscopy revealed changes in hydration of the lipid bilayer interface after peptide binding. Using monolayer techniques, the contributions of electrostatic and hydrophobic effects could clearly be observed. Peptides with short side chains induced a pronounced decrease in surface pressure of PG monolayers whereas peptides with additional hydrophobic interactions decreased the surface pressure much less or even lead to an increase, indicating insertion of the hydrophobic part of the side chain into the lipid monolayer.

Negatively charged phospholipids trigger the interaction of a bacterial Tat substrate precursor protein with lipid monolayers.

Folded proteins can be translocated across biological membranes via the Tat machinery. It has been shown in vitro that these Tat substrates can interact with membranes prior to translocation. Here we report a monolayer and infrared reflection-absorption spectroscopic (IRRAS) study of the initial states of this membrane interaction, the binding to a lipid monolayer at the air/water interface serving as a model for half of a biological membrane. Using the model Tat substrate HiPIP (high potential iron-sulfur protein) from Allochromatium vinosum, we found that the precursor preferentially interacts with monolayers of negatively charged phospholipids. The signal peptide is essential for the interaction of the precursor protein with the monolayer because the mature HiPIP protein showed no interaction with the lipid monolayer. However, the individual signal peptide interacted differently with the monolayer compared to the complete precursor protein. IRRA spectroscopy indicated that the individual signal peptide forms mainly aggregated ß-sheet structures. This ß-sheet formation did not occur for the signal peptide when being part of the full length precursor. In this case it adopted an α-helical structure upon membrane insertion. The importance of the signal peptide and the mature domain for the membrane interaction is discussed in terms of current ideas of Tat substrate-membrane interactions.

Interaction of a Tat substrate and a Tat signal peptide with thylakoid lipids at the air-water interface.

The Tat machinery enables folded proteins to be translocated across biological membranes. In vitro studies have shown that Tat substrates can interact with membranes prior to translocation. In this study we investigated the initial states of this interaction with thylakoid lipid monolayers at the air-water interface by using monolayer techniques combined with infrared reflection-absorption spectroscopy (IRRAS). We used enhanced green fluorescent protein (EGFP) as a model substrate and the signal peptide SP16 from the 16 kDa protein of the spinach oxygen-evolving complex (OEC16). We found that the signal peptide is essential for the interaction of the model substrate with lipid monolayers. IRRA spectroscopy showed an increased amount of α-helical secondary structure elements for the chimeric model substrate i16/EGFP (SP16 fused to EGFP) compared with EGFP; this can be attributed to the signal peptide.

Compatible solutes: ectoine and hydroxyectoine improve functional nanostructures in artificial lung surfactants.

Ectoine and hydroxyectoine belong to the family of compatible solutes and are among the most abundant osmolytes in nature. These compatible solutes protect biomolecules from extreme conditions and maintain their native function. In the present study, we have investigated the effect of ectoine and hydroxyectoine on the domain structures of artificial lung surfactant films consisting of dipalmitoylphosphatidylcholine (DPPC), dipalmitoylphosphatidylglycerol (DPPG) and the lung surfactant specific surfactant protein C (SP-C) in a molar ratio of 80:20:0.4. The pressure-area isotherms are found to be almost unchanged by both compatible solutes. The topology of the fluid domains shown by scanning force microscopy, which is thought to be responsible for the biophysical behavior under compression, however, is modified giving rise to the assumption that ectoine and hydroxyectoine are favorable for a proper lung surfactant function. This is further evidenced by the analysis of the insertion kinetics of lipid vesicles into the lipid-peptide monolayer, which is clearly enhanced in the presence of both compatible solutes. Thus, we could show that ectoine and hydroxyectoine enhance the function of lung surfactant in a simple model system, which might provide an additional rationale to inhalative therapy.

The binding of an amphipathic peptide to lipid monolayers at the air/water interface is modulated by the lipid headgroup structure.

We used monolayer techniques combined with infrared reflection absorption spectroscopy (IRRAS) to study the behavior of the 18-mer cationic peptide KLA1 (KLAL KLAL KAW KAAL KLA-NH2) at the air/water interface as well as its interaction with lipid films of different composition. The adsorption of the peptide from the subphase to the air/water interface was observed measuring the increase in surface pressure (π) at constant surface area. The binding of the peptide to lipid monolayers was followed by recording the change in lipid area at a constant surface pressure (π = 30 mN m(-1)). At the air/water interface, the peptide initially adopted an α-helix at large surface area per molecule, that is, low surface pressure, but further accumulation of the peptide at the interface induced a conformational change from α-helix to intermolecular ß-sheet, driven by intermolecular aggregation. When the peptide was injected into the subphase underneath lipid monolayers, it adsorbed pronouncedly to anionic monolayers containing phosphatidylglycerol forming an α-helix, but not to zwitterionic lipid monolayers. The large change in area observed upon peptide binding suggests that the peptide helix was incorporated into the apolar chain region of the lipids. An apparent partition coefficient of (0.3-1) × 10(6) M(-1) could be calculated for binding to pure POPG monolayers. Significant differences in binding affinity were observed comparing PG/PC with PG/PE monolayers, with the latter showing a higher binding constant. This shows that not only electrostatic and hydrophobic effects but also specific interactions between the headgroups of the lipids and the peptide side chains modulate the binding affinity.

Hsp12 is an intrinsically unstructured stress protein that folds upon membrane association and modulates membrane function.

Hsp12 of S. cerevisiae is upregulated several 100-fold in response to stress. Our phenotypic analysis showed that this protein is important for survival of a variety of stress conditions, including high temperature. In the absence of Hsp12, we observed changes in cell morphology under stress conditions. Surprisingly, in the cell, Hsp12 exists both as a soluble cytosolic protein and associated to the plasma membrane. The in vitro analysis revealed that Hsp12, unlike all other Hsps studied so far, is completely unfolded; however, in the presence of certain lipids, it adopts a helical structure. The presence of Hsp12 does not alter the overall lipid composition of the plasma membrane but increases membrane stability.

The microstructure of the stratum corneum lipid barrier: mid-infrared spectroscopic studies of hydrated ceramide:palmitic acid:cholesterol model systems.

The current mid-infrared spectroscopic study is a systematic investigation of hydrated stratum corneum lipid barrier model systems composed of an equimolar mixture of a ceramide, free palmitic acid and cholesterol. Four different ceramide molecules (CER NS, CER NP, CER NP-18:1, CER AS) were investigated with regard to their microstructure arrangement in a stratum corneum lipid barrier model system. Ceramide molecules were chosen from the sphingosine and phytosphingosine groups. The main differences in the used ceramide molecules result from their polar head group architecture as well as hydrocarbon chain properties. The mixing properties with cholesterol and palmitic acid are considered. This is feasible by using perdeuterated palmitic acid and proteated ceramides. Both molecules can be monitored separately, within the same experiment, using mid-infrared spectroscopy; no external label is necessary. At physiological relevant temperatures, between 30 and 35 degrees C, orthorhombic as well as hexagonal chain packing of the ceramide molecules is observed. The formation of these chain packings are extremely dependent on lipid hydration, with a decrease in ceramide hydration favouring the formation of orthorhombic hydrocarbon chain packing, as well as temperature. The presented data suggest in specific cases phase segregation in ceramide and palmitic acid rich phases. However, other ceramides like CER NP-18:1 show a rather high miscibility with palmitic acid and cholesterol. For all investigated ternary systems, more or less mixing of palmitic acid with cholesterol is observed. The investigated stratum corneum mixtures exhibit a rich polymorphism from crystalline domains with heterogeneous lipid composition to a "fluid" homogeneous phase. Thus, a single gel phase is not evident for the presented stratum corneum model systems. The study shows, that under skin physiological conditions (pH 5.5, hydrated, 30-35 degrees C) ternary systems composed of an equimolar ratio of ceramides, free palmitic acid and cholesterol may form gel-like domains delimitated by a liquid-crystalline phase boundary. The presented results support the microstructural arrangement of the stratum corneum lipids as suggested by the domain mosaic model.